FDOT Approved Hardware Vendor: HW-FL-001

Custom Manufactured Anchor Bolts, J-Bolts, and other Fasteners

We maintain a large inventory of standard 90-degree bend anchor bolts from 1/2 inches diameter to 1-1/4 inches diameter in plain and hot-dipped galvanized finish, double-end studs in 3/4 inches and 1 inch diameter plain finish, all thread studs in 3/4 inches diameter plain and galvanized finish, U-Bolts for 2 inches pipe to 18 inches pipe hot-dipped galvanized finish, U-Bolts for 1/4 inches pipe to 6 inches pipe zinc plated finish and U-bolts for 3/4 inches pipe to 6 inches pipe in stainless steel 304 finish.



Manufactured Products Include:

ASTM F1554

SCOPE Standard specification for anchor bolts, steel, 36, 55 and 105 ksi yield.
 
GRADES
F1554 Grade 36 Low carbon, 36 ksi yield steel anchor bolts
F1554 Grade 55 Low allow, 55 ksi yield steel anchor bolts
F1554 Grade 105 Alloy, heat treated, high stremgth 105 ksi yield steel anchor bolts
 
MECHANICAL
PROPERTIES
Grade Size Tensile, ksi Yield, ksi, min Yield, MPa, min Elong % min RA % min
36 1/4 - 4 58 - 80 36 248 23 40
55 1/4 - 2 75 - 95 55 380 21 30
2 1/8 - 2 1/2 75 - 95 55 380 21 22
2 5/8 - 3 75 - 95 55 380 21 20
3 1/8 - 4 75 - 95 55 380 21 18
105 1/4 - 3 125 - 150 105 724 15 45
* When Grade 36 is specified, a weldable Grade 55 may be furnished at the supplier's option.
 
RECOMMENDED
NUTS and WASHERS
Grade Size Nuts Washers
Plain Galvanized
36 1/4 - 1 1/2 A563A Hex A563A Hex F436
1 5/8 - 4 A563A Heavy Hex A563A Heavy Hex F436
55 1/4 - 1 1/2 A563A Hex A563A Heavy Hex F436
1 5/8 - 4 A563A Heavy Hex A563A Heavy Hex F436
105 1/4 - 1 1/2 A563D Hex A563D Heavy Hex F436
1 5/8 - 3 A563D Heavy Hex A563D Heavy Hex F436
* Nuts of other grades having proof load stresses greater than the specified grade are suitable. Follow the link for a Nut Compatibility Chart.